Skip to content
English
  • There are no suggestions because the search field is empty.

Bosch MED17.1.27 - TC1793

Bosch MED17.1.27 - TC1793 | Support & FAQ

Bosch MED17.1.27 - TC1793

Errors

Quick access to common issues and professional recovery solutions for the Bosch MED17.1.27 control unit.

Files not found

The required virtual read files are missing from the server, requiring a manual Bench read.

View Solution →

71-01-02-03-8D

Security conditions or vehicle preconditions for flashing have not been met by the system.

View Solution →

Concerns vehicles from

Audi Seat Skoda Volkswagen

Files not found

Method: OBD / Recovery: Bench

Issue: The bFlash server does not currently hold the original file required for your specific ECU software version during an OBD operation.

Solution
  • Switch the tool to BENCH mode to perform a full read of the ECU.
  • Export the read file from the bFlash software.
  • Send the file to support@bflash.eu along with your ECU details.
  • Wait for the technical team to add the file to the server for future OBD access.
To understand more

Virtual reading relies on a vast database of original files. If your specific Software ID is new or rare, it might not be indexed yet. Performing a Bench read bypasses the server requirement by reading the physical memory of the TC1793 processor directly.

71-01-02-03-8D

Method: OBD

Issue: The vehicle's gateway or the ECU itself is rejecting the flash request because specific environmental or safety conditions are not being met.

Solution
  • Ensure a high-quality battery charger is connected and maintaining stable voltage.
  • Open the vehicle hood (bonnet), as some VAG models require this as a security signal.
  • Turn off all electrical consumers, including HVAC (Air Conditioning) and all exterior/interior lights.
  • If the issue persists, Contact our technical support.
To understand more

Modern VAG Group vehicles use complex security protocols to prevent accidental flashing. This error code usually points to a "precondition" failure, meaning the ECU detects high electrical load or a security flag (like a closed hood) that prevents the writing sequence from starting safely.