Skip to content
English
  • There are no suggestions because the search field is empty.

Siemens SID305 - TC1766

Siemens SID305 - TC1766 FAQ | bFlash Support

Siemens SID305 - TC1766

Errors

Quickly identify and resolve common communication issues encountered during the programming of the Siemens SID305 ECU.

7F-10-22

The ECU is rejecting programming mode because one or more external environmental conditions have not been met.

View Solution →

Concerns vehicles from

Dacia Nissan Renault

7F-10-22

Method: OBD

Issue: Your bFlash tool is receiving a Conditions Not Correct response from the ECU, which prevents the session from transitioning into programming mode.

Solution
  • Open the HELP section directly within the bFlash protocol for this specific vehicle.
  • Verify that the battery voltage is stable and sufficient (typically above 12.5V).
  • Ensure the ignition is ON and the engine is completely OFF.
  • Confirm there are no active DTCs (Diagnostic Trouble Codes) stored in the engine module.
  • If the problem persists despite meeting all listed conditions, please Contact our technical support.
To understand more

The 7F-10-22 error code is a standard UDS response indicating that the ECU is "Not Ready." This is a protective measure by the Siemens SID305 firmware to ensure that the TC1766 microcontroller is not flashed under unstable conditions, which could lead to a permanent bricking of the unit.